Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

738 Fabric OS Command Reference

53-1001337-01

portSwapShow

Displays the state of the portswap feature.

Synopsis portswapshow

Description Use this command to display the enabled state of the portswap feature, as well as port and area

information for ports whose area number differs from the default area number. The default area

number of a port is the same as its switch port number.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command

Availability" for details.

Operands none

Examples To display the enabled state of the portswap feature and information for ports whose area numbers

have been swapped:

switch:admin> portswapshow

PortSwap is enabled

Slot Slotport Swport Area

============================================

2 2 18 19

2 3 19 18

See Also portSwap, portDisable, portEnable, portShow, portSwap, portSwapDisable, portSwapEnable,

switchShow