Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 791

53-1001337-01

secPolicySave

Saves a defined security policy to persistent memory.

Synopsis secpolicysave

Description Use this command to save a defined security policy to persistent memory. Secpolicysave saves the

modified SCC, DCC, and FCS policies to the Defined Security Policy Set on the local switch.

Notes This command is always a local switch operation. A fabric-wide consistency configuration does not

affect the behavior of this command.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands none

Example To save a defined policy set to persistent memory:

switch:admin> secpolicysave

secpolicysave command was completed successfully.

See Also fddCfg, secPolicyAbort, secPolicyActivate, secPolicyAdd, secPolicyCreate, secPolicyDelete,

secPolicyDump, secPolicyRemove, secStatsShow