Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

802 Fabric OS Command Reference

53-1001337-01

setVerbose

Specifies module verbose level.

Synopsis setverbose [module_name][level]

Description Use this command to set the verbose level of the specified module. These levels filter the display of

the debug message to the serial console. By default, no debug messages are displayed.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands This command has the following operands:

module_name Specify the name of the module for which the verbose level is to be set;

module names are case-sensitive.

level Specify the verbose level (0 to 9).

Examples To set the verbose level of a module named NS to value 3:

switch:admin> setverbose NS 3

switch:admin> dbgshow NS

Module NS, debug level = 0, verbose level = 3