Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

ManualsBrandsHP ManualsStorageBrocade 8/24c Power Pack+ SAN Switch for BladeSystem c-Class

841

842

843

844

845

846

847

848

849

850

812 Fabric OS Command Reference

53-1001337-01

slotShow

VACANT The slot is empty.

INSERTED, NOT POWERED ON

The blade is present in the slot but is turned off.

POWERING UP The blade is present and powering on.

LOADING The blade is present, powered on, and loading the initial configuration.

DIAG RUNNING POST1

The blade is present, powered on, and running the POST (power-on self-test).

DIAG RUNNING POST2

The blade is present, powered on, and running the pre-boot power on self

tests.

INITIALIZING The blade is present, powered on, and initializing hardware components.

ENABLED The blade is on and fully enabled.

ENABLED (SAS Virtualization Disabled)

The blade is on, but due to an incompatibility between the FOS image and the

SAS or Application image, the SAS Virtualization services are disabled. Only

applies to the FA4-18 blade.

DISABLED The blade is powered on but disabled.

FAULTY The blade is faulty because an error was detected.

UNKNOWN The blade is inserted but its state cannot be determined.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command

Availability" for details.

Operands This command supports the following operands:

-p In addition to the basic slot status view, displays the following information

about power consumption:

• Direct current (DC) power consumption for each Blade in Watts.

• Total alternate current (AC) Power Consumption in Watts.

• AC efficiency, as a percentage of total and BTU.

• Power efficiency in Watts/port and Watts/Gb.

-m In addition to the basic slot status view, displays the Brocade model name for

each blade.

Examples To display a basic view of all slots and their status:

switch:user> slotshow

Slot Blade Type ID Status

-----------------------------------

1 SW BLADE 51 FAULTY

2 SW BLADE 51 DISABLED

3 SW BLADE 55 ENABLED

4 SW BLADE 51 DIAG RUNNING POST2

5 CORE BLADE 52 ENABLED