Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

842 Fabric OS Command Reference
53-1001337-01
supportShow
2
Operands This command has the following operands:
slotnumber On bladed systems only, specifies a slot number, followed by a slash (/).
portnumber1-portnumber2
Specifies the range of ports for which to display supportShow information. If a
port range is not specified, the command displays information for all ports.
lines Specifies the number of lines for the portLogDump output. This parameter is
valid only with the slotnumber/portnumber parameters.
Examples To display debugging information:
switch:admin> supportshow
VF
======================
Date:
Wed Oct 22 09:31:41 UTC 2008
Time Zone:
Time Zone Hour Offset: 0
Time Zone Minute Offset: 0
Version:
Kernel: 2.6.14.2
Fabric OS: v6.2.0_main_bld26
Made on: Mon Oct 20 10:10:30 2008
Flash: Mon Oct 20 16:04:18 2008
BootProm: 1.0.6
supportshow groups enabled:
os enabled
exception enabled
port enabled
fabric enabled
services enabled
security enabled
network enabled
portlog enabled
system enabled
extend disabled
filter disabled
perfmon disabled
ficon disabled
iswitch enabled
asic_db enabled
iscsi enabled
fcip enabled
ag enabled
crypto disabled
**** Begin start_port_log_cmd group ****
Wed Oct 22 09:31:44 UTC 2008
portlogdump:
portlogdump:
CURRENT CONTEXT -- 0 , 128
/fabos/cliexec/portlogdump :
time task event port cmd args
-------------------------------------------------
Tue Oct 21 07:32:21 2008