Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

848 Fabric OS Command Reference

53-1001337-01

switchCfgPersistentDisable

Disables a switch persistently.

Synopsis switchcfgpersistentdisable

Description Use this command to persistently disable the switch. All Fibre Channel ports are taken offline. If the

switch was part of a fabric, the remaining switches reconfigure. The switch remains disabled even

after a reboot.

The disable process can be observed and verified by watching the front panel LEDs change to slow

flashing yellow as each port is disabled.

A persistently disabled switch can be temporarily enabled using the switchEnable command. A

temporarily enabled switch remains disabled after a reboot.

Notes Performance Monitoring cannot be added to any port on a persistently disabled switch.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands none

Examples To disable a switch persistently:

switch:admin> switchcfgpersistentdisable

See Also switchDisable, switchEnable, switchCfgPersistentEnable, switchShow