Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 873
53-1001337-01
syslogdIpRemove
2
syslogdIpRemove
Removes a server that is running the syslog daemon.
Synopsis syslogdipremove ip_address
Description Use this command to remove a server that is running the syslogd process and to which system
messages are sent from the syslog server configuration on the switch. IPv6 and IPv4 syslogd
addresses are supported. Use syslogdIPShow to view the current syslog server configuration.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operand:
ip_address Specifies the IP address of the server running syslogd.
Examples To remove the IP address 1080::8:800:200C:417A from the list of machines to which system
messages are sent:
switch:admin> syslogdipshow
syslog.1 1080::8:800:200C:417A
switch:admin> syslogdipremove 1080::8:800:200C:417A
See Also errShow, syslogdFacility, syslogdIpAdd, syslogdIpShow