Brocade Fabric OS Command Reference - Supporting Fabric OS v7.0.1 (53-1002447-01, March 2012)

Fabric OS Command Reference 1075

53-1001764-01

zoneAdd

Adds a member to the zone.

SYNOPSIS zoneadd "zoneName", "member[; member]"

DESCRIPTION Use this command to add one or more members to an existing zone.

This command changes the defined configuration. For the change to be preserved across switch

reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change to

become effective, enable the configuration with the cfgEnable command.

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

When an FCS policy is enabled, this command can be issued only from the primary FCS switch.

OPERANDS The following operands are required:

"zoneName"

Specify the name of an existing zone. Double quotation marks are optional.

"member"

Specify a member or list of members to be added. The list must be enclosed in

double quotation marks. Members must be separated by semicolons. Members

can be specified in one or more of the following ways:

• A switch domain and port index number pair; for example, "2, 20". Use

switchShow for a listing of valid port index numbers.

• Node or port WWN.

• Zone alias name.

EXAMPLES To add aliases for three disk arrays to "Blue_zone":

switch:admin> zoneadd "Blue_Zone", "array3; array4; array5"

SEE ALSO zoneCreate, zoneDelete, zoneRemove, zoneShow