Brocade Fabric OS Command Reference - Supporting Fabric OS v7.0.1 (53-1002447-01, March 2012)

Fabric OS Command Reference 201
53-1001764-01
cryptoCfg
2
--show -rekey
Displays information about rekey sessions in progress. This command is valid on
all nodes. The following operands are mutually exclusive:
-all
Lists all rekey sessions in progress on the current node.
crypto_target_container_name
Lists all rekey sessions in progress for a specified CryptoTarget container. You
may further specify either one of the following operands:
LUN_Num
Lists all rekey sessions in progress for a specific Crypto LUN of the specified
CryptoTarget container.
initiator_PWWN
Lists all rekey sessions in progress for a specific initiator of the specified
CryptoTarget container.
--show -tape_sessions
Displays runtime tape session information. This command is valid on all nodes.
The following operands are mutually exclusive:
-all
Displays runtime information for all tape sessions in progress on the local node.
crypto_target_container_name
Displays runtime information for all tape sessions in progress for a specified
CryptoTarget container.
--clearstats -container
Clears compressed or uncompressed blocks and/or byte counters for the
specified containers. Specify one of the following operands:
-all
Clears blocks and/or byte counters for all CryptoTarget tape containers.
crypto_target_container_name
Clears blocks and/or byte counters for all CryptoLUNs of the specified
CryptoTarget tape container.
--clearstats -LUN
Clears compressed or uncompressed blocks and/or byte counters for a specific
CryptoLUN. The following operands are required:
crypto_target_container_name
Specifies the CryptoTarget tape container for the LUN.
LUN_Num
Specifies the number of the LUN to be cleared.
initiator_PWWN
Specifies the initiator port WWN for the specified LUN.
--refreshDEK
Rereads the mirror LUN metadata and updates the FPGA tables for the LUN if the
keyID in the metadata has changed. You must issue this command on the node of
the EE where the container that includes the mirror LUN is hosted. An RSA RKM
must be configured for the encryption group and replication mode must be
enabled for this command to succeed. This command fails if the specified LUN
was not added with -newLUN option. The refresh operation may cause a brief
disruption of the host I/O. The following operands are required:
crypto_target_container_name
Specifies the CryptoTarget container for the LUN.