Brocade Fabric OS Command Reference - Supporting Fabric OS v7.0.1 (53-1002447-01, March 2012)

132 Fabric OS Command Reference

53-1001764-01

configDownload

To attempt to download the Virtual Fabric configuration interactively to a switch with configured Admin

Domains:

switch:admin> configdownload -vf -p sftp \

10.32.248.119,jdoe,/temp/switch-conf_66.txt,mypassword

*** CAUTION ***

This command is used to download the VF configuration to the

switch. Afterwards, the switch will be automatically rebooted

and the new VF settings will be used. You will then need to

run configdownload again to install the configuration(s) for

any logical switch(s) that are setup in the new VF configuration.

Please note that Virtual Fabrics and Admin Domains are mutually

exclusive and are not supported at the same time on a switch.

If any Admin Domains are configured on the switch, the

configdownload operation will fail.

Do you want to continue [y/n]: y

jdoe@10.32.248.119's password:

Error: configDownload operation failed. VF/AD Conflict detected.

Please remove all ADs before downloading the VF configuration to

the switch.

2011/06/12-17:14:02, [CONF-1023], 3637, FID 128, INFO, sw0,

configDownload failed for VF config parameters.

SEE ALSO configDefault, configList, configShow, configUpload, configure, configRemove