Brocade Fabric OS Command Reference - Supporting Fabric OS v7.0.1 (53-1002447-01, March 2012)

Fabric OS Command Reference 521
53-1001764-01
msPlMgmtActivate
2
msPlMgmtActivate
Activates the Management Server (MS) platform service.
SYNOPSIS msplmgmtactivate
DESCRIPTION Use this command to activate the MS platform service throughout the fabric. This command attempts to
activate the MS platform service for each switch in the fabric. The change takes effect immediately and is
committed to the configuration database of each affected switch. MS activation is persistent across
power cycles and reboots.
NOTES By default, the MS platform service is disabled.
Before issuing this command, run msCapabilityShow to verify that all switches in the fabric support the
MS platform service; if one switch does not support the service, the command fails.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
This command is supported only in AD0 and AD255 contexts.
OPERANDS None
EXAMPLES To activate the MS platform service:
switch:admin> msplmgmtactivate
Request to activate MS Platform Service in progress......
*Completed activating MS Platform Service in the fabric!
SEE ALSO msCapabilityShow, msPlatShow, msPlClearDB, msPlMgmtDeactivate