Brocade Fabric OS Command Reference - Supporting Fabric OS v7.0.1 (53-1002447-01, March 2012)

Fabric OS Command Reference 785
53-1001764-01
portShow
2
-act
Displays the current Active Exchange information.
options
The following additional option is supported.
-clear
Resets the specified statistics. This operand is optional; it requires a
preceding command.
-mem adrs length
Specifies the SE memory length in words to display. The valid range for length is 0
to 1024.
-dram2
Display the current usage of the dynamic memory allocator.
-pools
Display the current free pool allocation (FPA) buffer usage.
-tcb
Displays tunnel statistics.
-drshow
Displays the current Descriptor Ring status
-smem
Displays the current Shadow Memory data.
-rte
Displays the current Routing Info SE memory.
EXAMPLES To display FCIP tunnel configuration parameters on the Brocade 7800 with Ficon enabled:
switch:admin> portshow fciptunnel 16
-------------------------------------------
Tunnel ID: 16
Tunnel Description:
Admin Status: Enabled
Oper Status: Up
Compression: On (Aggressive)
Fastwrite: Off
Tape Acceleration: Off
TPerf Option: Off
IPSec: Disabled
QoS Percentages: High 50%, Med 30%, Low 20%
Remote WWN: Not Configured
Local WWN: 10:00:00:05:1e:a5:54:bd
Peer WWN: 00:00:00:00:00:00:00:00
Circuit Count: 4
Flags: 0x00000000
FICON: On
FICON XRC: Off
FICON Tape Write: On
FICON Tape Read: On
FICON TinTir Emul: On
FICON Dvc Acking: On
FICON Read BLK-ID: On
FICON Teradata Write: On
FICON Teradata Read: On
Tape Write Pipe: 63
Tape Read Pipe: 65
Tape Write Devs: 32