HP B-series Network Advisor Enterprise, Professional Plus, and Professional 12.1.5 Release Notes

SLP on Windows systems

This section describes how to verify the SLP daemon on Windows systems. The following are SLP

file locations:

• SLP log—Management_Application\cimom \cfg\slp.log

• SLP daemon—Management_Application\cimom\cfg\slp.conf (the SLP daemon can

be reconfigured by modifying this file).

• SLP register—Management_Application\cimom\cfg\slp.reg

Statically register an application that does not dynamically register with SLP using SLPAPIs by

modifying this file. For more information about these files, read the comments contained in

them, or see http://www.openslp.org/doc/html/UsersGuide/index.html.

Verifying SLP service installation and operation on Windows systems:

1. Launch the Server Management Console from the Start menu

2. Click Start to start the SLP service.

3. Open a command window.

4. Enter cd c:\Management_Application\cimom \bin and press Enter to change to

the directory where slpd.bat is located.

5. Enter > slptool findsrvs service:service-agent and press Enter to verify the

SLP service is running as a Service Agent.

6. Enter > slptool findsrvs service:wbem and press Enter to verify the SLP service

is advertising its WBEM services.

7. Select one of the following options to verify the SLP service is advertising the WBEM SLP

template over its configured client protocol adapters.

• Enter > slptool findattrs service:wbem:http://IP_Address:Port and

press Enter.

• Enter > slptool findattrs service:wbem:https://IP_Address:Port and

press Enter.

NOTE: IP_Address:Port is the IP address and port number that display when you

use the slptool findsrvs service:wbem command.

Enumeration issue with HP 2408 FCoE Converged Network Switch running on Fabric OS 6.3.x

or earlier

When Network Advisor manages an HP 2408 FCoE Converged Network Switch running Fabric

OS 6.3.x or earlier, connected to an FDMI enabled CNA, enumeration instance fails for the

following classes:

• Brocade_EthernetPortLANEndPoint

• Brocade_EthernetAdminDomainHostedLanEndPoint

• Brocade_EndpointOfNetworkPipe Brocade_LANEndpoint

• Brocade_EthernetSwitchHostedLANEndPoint

• Brocade_InEthernetLogicalNetwork

• Brocade_PlatformHostedLANEndPoint

Instance class key property with special character

Getinstance operation fails if the key property value contains either a semicolon or a

non-printable character.