HP B-series Network Advisor Enterprise, Professional Plus, and Professional 12.1.5 Release Notes

FC port type value for imported HBAs
Brocade_topologyview.AntecedentFCPortType property value corresponding to the
imported HBA is shown as L_Port.
Documentation Updates
For the most recent Network Advisor documentation, visit the following HP website: http://
h18006.www1.hp.com/products/storageworks/dc_fabricmgr/index.html.
Under Support, select HP Support & Documents, and then select Manuals.
HP Network Advisor 12.0.0 fixes
Table 7 (page 21) lists the closed defects for this release.
Table 7 HP Network Advisor 12.0.0 closed defects
SolutionClosed fixes summary
Fixed in Network Advisor 12.0.0.Port numbers overlap when “Link Information Visibility” is enabled in the
Options Dialog in L2/IP/VLAN Topology for multiple connections and trunk
connections.
Workaround prior to upgrade:Users are able to see the properties of a device through the static product
group properties, which has been removed from an AOR.
Re-login into the client.
Fixed in Network Advisor 12.0.0.
Fixed in Network Advisor 12.0.0.Users are able to see imported loop devices in the topology even after
removing them from the LSAN Zone.
Workaround prior to upgrade:Unable to disable MSTP on a port level for an MSTP non-instance 0.
Use the element manager to perform the
disable.
Fixed in Network Advisor 12.0.0.
Workaround prior to upgrade:The operation fails when users attempt to de-register the key vault using CLI.
Use double quotes around the label in CLI
during deregistration.
Fixed in Network Advisor 12.0.0.
Workaround prior to upgrade:SAN discovery fails with an incorrect error message when users attempt to
discover an SSL-enabled switch, without enabling the SSL option in Network
Advisor.
Enable the SSL option in the Product
Communication tab of the Options dialog
of Network Advisor.
Fixed in Network Advisor 12.0.0.
Fixed in Network Advisor 12.0.0.Customers are unable to install the HP Branded SCOM package.
Fixed in Network Advisor 12.0.0.In the Port Optics dialog, the table cannot be sorted by Tx Power or Rx
Power columns.
Workaround prior to upgrade:The local LIC client logs (when client is launched through the SMI-A
configuration tool) are not collected when the support save operation is
triggered from the Server Console.
Manually copy the client.log file
along with client supportsave which is
generated at the time of LIC client launch.
Fixed in Network Advisor 12.0.0.
Fixed in Network Advisor 12.0.0.Customizations made to columns in the Diagnostics Results/Avg Round Trip
Delay dialog of the L2 Traceroute dialog are not persisted.
Fixed in Network Advisor 12.0.0.On NetIron MLX devices, the L3 ACL value is shown as ‘0’ in the port
configuration dialog when the IPv6 access list is assigned to the ports.
Migration and upgrades 21