HP StorageWorks Secure Fabric OS 5.0.0 User Guide (AA-RW1UA-TE, May 2005)

Managing Secure Fabric OS102
5. Reenter the password exactly as entered the first time.
For example, to create a temporary password for the admin account on a switch that has
a Domain ID of 2:
Removing a temporary password from a switch
The secTempPasswdReset command can be used to remove the temporary password. The
permanent password remains in effect.
To remove the temporary password from a switch:
1. From a sectelnet or Secure Shell session, log in to the primary FCS switch as admin.
2. Type secTempPasswdReset domain, “login_name”.
Domain is the domain ID of the switch for which you want to remove the temporary
password. Login_name is the login account to which the temporary password applies.
You can enter the command with no parameters to reset all temporary passwords in the
fabric.
For example, to removing a temporary password for the admin account from a switch that
has a domain ID of 2:
Resetting the version number and time stamp
When a change is made to any information in the Secure Fabric OS database (zoning,
policies, passwords, or SNMP), the current time stamp and a version number are attached to
the Secure Fabric OS database.
This information is used to determine which database is preserved when two or more fabrics
are merged. The database of the fabric with a nonzero version stamp is kept. When merging
fabrics, ensure that the version stamp of the database you want to preserve is nonzero; then,
set the version stamp of all other fabrics to 0. To ensure that the time stamp of a fabric is
nonzero, modify a policy and enter the secPolicySave or secPolicyActivate
command.
primaryfcs:admin> sectemppasswdset 2, ”admin”
Set remote switch admin password: swimming
Re-enter remote switch admin password: swimming
Committing configuration........done
Password successfully set for domain 2 for admin.
switch:admin> sectemppasswdreset 2, “admin”
Committing configuration.....done
Password successfully reset on domain 2 for admin