HP StorageWorks Secure Fabric OS 5.0.0 User Guide (AA-RW1UA-TE, May 2005)

91Secure Fabric OS 5.0.0 user guide
For example, to display all policies in both active and defined policy sets:
Displaying individual Secure Fabric OS policies
Use the secPolicyShow command to display information about one or more specified
Secure Fabric OS policies. This command displays information, with page breaks.
To display information about a specific Secure Fabric OS policy:
1. From a sectelnet or Secure Shell session, log in to the primary FCS switch as admin.
2. Type secpolicyshow “listtype”, “policy_name”.
listtype is the type of Secure Fabric OS policy set. It can be active, defined, or an
asterisk (*), which displays both versions of the specified policy. policy_name is the name
of the Secure Fabric OS policy. If you do not specify a policy name, the command
displays all the policies in the specified policy set.
If you do not specify any operands, the command displays all policies in both the active
and defined policy sets.
primaryfcs:admin> secpolicydump
____________________________________________________
DEFINED POLICY SET
FCS_POLICY
Pos Primary WWN DId swName
__________________________________________________
1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs
HTTP_POLICY
IpAddr
__________________________________________________
192.155.52.0
____________________________________________________
____________________________________________________
ACTIVE POLICY SET
FCS_POLICY
Pos Primary WWN DId swName
__________________________________________________
1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs
HTTP_POLICY
IpAddr
__________________________________________________
192.155.52.0
192.155.53.1
192.155.54.2
192.155.55.3
____________________________________________________