Brocade EZSwitchSetup Administrator's Guide v6.2.0 (53-1001193-02, April 2009)

EZSwitchSetup Administrator’s Guide 13
53-1001193-02
Installing and running the EZSwitchSetup wizard
2
3. At this point, you can do either of the following.
- Click Finish to save the configuration if you want to use EZSwitchSetup as an IP
configuration tool, and do not want to use EZSwitchSetup Manager as a management tool
for the switch.
- Enable and start the EZSwitchSetup Manager by clicking Continue with EZManager. If you
intend to use EZSwitchSetup Manager as your primary management program, you must
click Continue with EZManager at this time to enable and use EZSwitchSetup Manager.
FIGURE 11 Continue Configuration screen