Brocade EZSwitchSetup Administrator's Guide v6.2.0 (53-1001193-02, April 2009)

38 EZSwitchSetup Administrator’s Guide
53-1001193-02
Managing devices
3
2. Select a row in the table to display additional information about the device.
3. Click View Details located at the top of the page. Figure 36 shows a Device Details example.
FIGURE 36 Detailed Device information
Device connections
EZSwitchSetup Switch Manager displays a graphical representation of the switch and the devices
that are connected to each port.
Click Display Connections under Devices in the task panel.
A graphical representation of the switch and connections displays, as shown in Figure 37. This is a
real-time display; the connections are updated automatically as you connect and disconnect HBAs
and storage.
If Typical Zoning is set on the switch, Switch Manager validates the connections and displays
whether the connections are valid or invalid.