Brocade EZSwitchSetup Administrator's Guide v6.2.0 (53-1001193-02, April 2009)

viii EZSwitchSetup Administrator’s Guide
53-1001193-02
Supported Hardware and Software
This document supports the following platforms:
• Brocade 200E switch
• Brocade 300 switch
• Brocade 4100 switch
• Brocade 4900 switch
• Brocade 5000 switch
• Brocade 5100 switch
• Brocade 5300 switch
In those instances in which procedures or parts of procedures documented here apply to some
switches but not to others, this guide identifies exactly which switches are supported and which are
not.
Although many different software and hardware configurations are tested and supported by
Brocade Communications Systems, Inc. for Fabric OS 6.2.0, documenting all possible
configurations and scenarios is beyond the scope of this document; however, this document does
specify when procedures or parts of procedures apply only to specific switches.
This document does not support all Fabric OS versions. This document is specific to Fabric OS
6.2.0. To obtain information about an OS version other than 6.2.0, see the documentation specific
to that OS version.
What’s New in This Document
The following changes have been made since this document was last released:
• Updated IP address confirm procedure.
• Updated IP address confirm screen captures.
• Added a procedure for setting up DHCP.
• Added a procedure for making EZSwitchSetup manager launch as the default management
tool instead of Web Tools.