Brocade Web Tools Administrator's Guide - Supporting Fabric OS v5.3.0 (53-1000435-01, June 2007)

Web Tools Administrator’s Guide 79
Publication Number: 53-1000435-01
Disabling or reenabling trunking mode on a port
6
Trunking is not supported on logical ports, GbE ports, or EX_Ports.
Admin Domain considerations: You can enable and disable trunking for a port only when the
current Admin Domain owns the switch. You can log into a switch that is not in your Admin Domain,
but most of the functionality will be unavailable.
To disable or reenable trunking mode on a port
1. Click a port in the Switch View to open the Port Management module (see Figure 33 on
page 64).
2. Click the FC Ports tab.
Trunking mode does not apply to GbE ports.
3. From the tree on the left, click the switch name or slot name.
4. From the table, select the port that you want to trunk.
You can select multiple ports from the table. You cannot select multiple ports from the tree.
Trunking mode does not apply to logical ports.
5. Click the Enable Trunking or Disable Trunking button.
If the button is unavailable, the port is already in that state. For example, if Enable Trunking is
unavailable (appears dimmed), trunking is already enabled for the selected port or ports.
6. Click Yes in the confirmation window.