Brocade Web Tools Administrator's Guide - Supporting Fabric OS v5.3.0 (53-1000435-01, June 2007)
132 Web Tools Administrator’s Guide
Publication Number: 53-1000435-01
Managing performance graphs
9
4. Click the port from the Slot/Port Selection List and drag it into the Enter/drag slot,port field.
5. Optional: For the LUN per port graphs, type a LUN number, in hexadecimal notation.
For the Brocade 4100 or 5000 switch, you can enter up to eight LUN masks.
For the Brocade 48000 director, you can enter up to four LUN masks.
For all other switches running Fabric OS 4.x or v5.x, you can enter up to two LUN masks.
For switches running Fabric OS 3.x, you can enter up to three LUN masks.
6. Click OK.
The selected graph is displayed in the canvas.
CREATING AL_PA ERROR GRAPHS
The AL_PA Error graph displays CRC errors for a given port and a given AL_PA. The AL_PA Error
graph is not supported on the following:
• Brocade 200E, 4012, 4016, 4018, 4020, 4024, 4100, 4900, 5000, 7500, and 7600
• Brocade 48000 with an FR4-18i, FC4-16IP, FC-18 or FC4-48 blade(s) installed
To create an AL_PA error graph
1. Open the Performance Monitoring window.
2. Click Performance Graphs> Advanced Monitoring> ALPA Error.
The ALPA Error Setup dialog box opens.
3. Navigate to a switch> slot> port in the Slot/Port or Alpa Selection List.
4. Click the port from the Slot/Port Selection List or an AL_PA from the Slot/Port Selection List,
and drag it into the “Enter/drag slot,port” field. You can also manually type the slot and port
number, in the format slot,port.
5. Click OK.
The AL_PA Error graph opens on the canvas.
Managing performance graphs
This section provides the following procedures for managing performance graphs:
• Saving graphs to a canvas . . . . . . . . . . . . . . . . . . . . 132
• Adding graphs to a canvas . . . . . . . . . . . . . . . . . . . . 133
• Printing graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
• Modifying graphs . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
SAVING GRAPHS TO A CANVAS
Saving graphs is especially useful when you create customized graphs and do not want to re-create
them every time you access the Performance Monitoring window.
When you save graphs, you must save them to a canvas. The following procedure describes how to
save graphs to a new canvas.