Brocade Web Tools Administrator's Guide - Supporting Fabric OS v5.3.0 (53-1000435-01, June 2007)

Web Tools Administrator’s Guide 165
Publication Number: 53-1000435-01
Configuring email notifications
12
To configure the email alert alarm
1. Open the Fabric Watch window.
2. Click the Email Configuration tab.
3. Click the Enable or Disable radio button to enable or disable the email alert status.
When you disable email alerts, Fabric Watch does not send email notification even if the email
notification method is assigned to monitored areas.
4. Type the email address of the recipient in the Recipient Email Address text box. Messages are
sent to this address when email notification is enabled.
NOTE
Email addresses must not exceed 128 characters.
5. Click Apply.
6. Optional: Click Send Test Email to receive a test email so you can verify the email notification is
working correctly. You can send a test email only after you have applied your settings.
FIGURE 74 Fabric Watch Email Configuration tab