Brocade Web Tools Administrator's Guide - Supporting Fabric OS v5.3.0 (53-1000435-01, June 2007)

226 Web Tools Administrator’s Guide
Publication Number: 53-1000435-01
Configuring CUP port connectivity
18
4. Click the CUP Port Connectivity subtab (see Figure 101).
FIGURE 101 Configuring CUP port connectivity
CREATING OR EDITING CUP PORT CONNECTIVITY CONFIGURATIONS
Use the following procedure to create a new CUP port connectivity configuration or to edit an
existing configuration.
To create or edit CUP port connectivity configurations
1. Display the CUP port connectivity configuration list, as described on page 225.
2. You can either create a new configuration or edit an existing configuration.
- To create a new configuration, click New.
The Create Port CUP Connectivity Configuration dialog box displays all ports and port
names on the selected switch (similar to the dialog box shown in Figure 102). The Block
column, Prohibit column, and prohibited ports matrix are displayed as empty, for you to
configure.
- To edit an existing configuration, click the configuration and then click Edit.
The Edit Port CUP Connectivity Configuration dialog box displays the content of the
selected configuration from the switch in a table format (see Figure 102).