Brocade Web Tools Administrator's Guide - Supporting Fabric OS v5.3.0 (53-1000435-01, June 2007)

228 Web Tools Administrator’s Guide
Publication Number: 53-1000435-01
Configuring CUP port connectivity
18
ACTIVATING A CUP PORT CONNECTIVITY CONFIGURATION
When you activate a saved CUP port connectivity configuration on the switch, the preceding
configuration (currently activated) is overwritten.
To activate a saved CUP port connectivity configuration
1. Open the CUP port connectivity configuration list, as described on page 225.
2. Click the saved configuration from the list.
3. Click Activate.
The Activate CUP Port Connectivity Configuration confirmation dialog box opens.
FIGURE 103 Activate CUP Port Connectivity Configuration confirmation dialog box
The message reminds you that the current configuration will be overwritten upon activation.
4. Optional: Click Active=Saved Mode to enable (selected) or disable (not selected) the
Active=Saved FMS parameter after the configuration is activated.
5. Click Yes to activate the configuration or click No to cancel the activation.
COPYING A CUP PORT CONNECTIVITY CONFIGURATION
Use the following procedure to copy a CUP port connectivity configuration to a new configuration.
To copy a saved CUP port connectivity configuration
1. Display the CUP port connectivity configuration list, as described on page 225.
2. Click a saved configuration or the active configuration from the list.
3. Click Copy.
The Copy CUP Port Connectivity Configuration dialog box displays.
4. In the dialog box, type a name and description for the new configuration and click OK to save
the configuration to the target file; click Cancel to cancel copying the configuration.
The file name must be in alphanumeric characters and can contain only dashes or
underscores as special characters.
DELETING A CUP PORT CONNECTIVITY CONFIGURATION
Use the following procedure to delete a saved CUP port connectivity configuration.