Brocade Web Tools Administrator's Guide - Supporting Fabric OS v5.3.0 (53-1000435-01, June 2007)

32 Web Tools Administrator’s Guide
Publication Number: 53-1000435-01
Configuring IP and netmask information
3
To access telnet through Web Tools
1. Select a switch in Fabric Tree.
You are prompted to log in if the OS is version 5.3.0. Otherwise, the selected switch appears in
the Switch View.
2. Click the Telnet button in the Other section of the Tasks menu.
Web Tools opens two windows: the Telnet window and another HTML-based window which is
used to launch the Telnet window. Click OK to close the HTML-based window. The Telnet
window remains open.
3. In the telnet window, enter your user credentials at the login prompt.
4. To close the session, type exit at the prompt.
Configuring IP and netmask information
When you configure IP and netmask information for the Brocade 24000 or 48000 director, you
must configure IP and subnet mask information individually.
When you change the Ethernet IP, subnet mask, gateway IP, or Fibre Channel IP and subnet mask
from Web Tools, there is a normal loss of network connection to the switch. If the IP properties have
changed, you must close all current windows and restart Web Tools with the new IP address.
To configure IP and netmask information
1. Open the Switch Administration window as described on page 31.
2. Click the Network tab.
FIGURE 16 Network tab