Brocade Web Tools Administrator's Guide - Supporting Fabric OS v5.3.0 (53-1000435-01, June 2007)

Web Tools Administrator’s Guide 35
Publication Number: 53-1000435-01
Managing blades
3
ENABLE OR DISABLE A BLADE
To enable or disable a blade
1. Open the Switch Administration window as described on page 31.
2. Click the Blade tab.
The Firmware Version columns display the firmware loaded onto each blade. A blade can have
more than one firmware image loaded onto it.
The Enable Blade column in the Blade tab pane indicates whether the blade is enabled.
FIGURE 18 Blade tab
3. Select the Enable Blade check box for each blade you want to enable. Clear the check box to
disable the blade. You cannot enable or disable the CP blades.
4. Click Apply.
Set IP address
To set a slot-level IP address
1. Open the Switch Administration window as described on page 31.
2. Click the Blade tab.