Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

Fabric OS Message Reference 113
53-1000600-02
FABS-1008
16
Severity WARNING
FABS-1008
Message <timestamp>, [FABS-1008], <sequence-number>,, WARNING, <system-name>, <Function
name>
: Media oid mapping failed
Probable Cause Indicates that the Fabric OS was unable to locate a necessary object handle. This is usually an
internal Fabric OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
Severity WARNING
FABS-1009
Message <timestamp>, [FABS-1009], <sequence-number>,, WARNING, <system-name>, <Function
name>
: type is not media
Probable Cause Indicates that the Fabric OS was unable to locate an appropriate object handle. This is usually an
internal Fabric OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
Severity WARNING
FABS-1010
Message <timestamp>, [FABS-1010], <sequence-number>,, WARNING, <system-name>, <Function
name>: Wrong media_event <Event number>
Probable Cause Indicates that the Fabric OS detected an unknown event type. This is usually an internal Fabric OS
problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, run the firmwareDownload command to update the firmware.
Severity WARNING
FABS-1011
Message <timestamp>, [FABS-1011], <sequence-number>,, ERROR, <system-name>, <Method
name>[<Method tag number>]:Invalid input state 0x<Input state code>
Probable Cause An unrecognized state code was used in an internal Fabric OS message for a FRU.