Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

Fabric OS Message Reference 157
53-1000600-02
FICN-1030
23
Recommended
Action
If there was an unexpected job failure or IO Error associated with this event, please contact your
vendor's customer support for assistance.
Severity ERROR
FICN-1030
Message <timestamp>, [FICN-1030], <sequence-number>,, ERROR, <system-name>,
HostDiskIng:FICON Purge received:Path=<FICON PATH>.
Probable Cause An active disk emulation device received a FICON Purge Path from the channel.
Recommended
Action
If there was an unexpected job failure or IO Error associated with this event, please contact your
vendor's customer support for assistance.
Severity ERROR
FICN-1031
Message <timestamp>, [FICN-1031], <sequence-number>,, WARNING, <system-name>,
HostDiskIng:FICON System Reset received on Path=<FICON PATH>.
Probable Cause The FICON channel sent a System Reset to the disk control unit.
Recommended
Action
No action is required. The MVS system was either set to IPL or performing error recovery.
Severity WARNING
FICN-1032
Message <timestamp>, [FICN-1032], <sequence-number>,, INFO, <system-name>,
HostDiskIng:XRC Read Channel Extender Capabilities detected on Path: <FICON PATH>.
Probable Cause The XRC System Data mover was restarted to discover the capabilities of the channel extension
equipment.
Recommended
Action
No action is required. This is a part of the XRC initialization.
Severity INFO
FICN-1033
Message <timestamp>, [FICN-1033], <sequence-number>,, INFO, <system-name>,
HostEgr:Logical Path Established on Path=<FICON PATH>.
Probable Cause The peer side FICON Control Unit has accepted a logical path establishment command sequence
with the FICON channel.