Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

Fabric OS Message Reference 167
53-1000600-02
FICN-1067
23
Recommended
Action
This is an unexpected event, either the maximum number of emulation devices are already in use
or there is an internal memory leak, please contact your vendor's customer support for assistance.
Severity WARNING
FICN-1067
Message <timestamp>, [FICN-1067], <sequence-number>,, ERROR, <system-name>, Ingress
Abort:Oxid=0x<the OXID of the aborted exchange>:Abort for CH=0x<FICON PATH>.
Probable Cause An abort operation has been received from a local FC interface for an emulation CH exchange.
Recommended
Action
If there were associated IO errors at the same time as this event, please contact your vendor's
customer support for assistance.
Severity ERROR
FICN-1068
Message <timestamp>, [FICN-1068], <sequence-number>,, ERROR, <system-name>, Ingress
Abort:Oxid=0x<the OXID of the aborted exchange>:Abort for CU=0x<FICON PATH>.
Probable Cause An abort operation has been received from a local FC interface for an emulation CU exchange.
Recommended
Action
If there were associated IO errors at the same time as this event, please contact your vendor's
customer support for assistance.
Severity ERROR
FICN-1069
Message <timestamp>, [FICN-1069], <sequence-number>,, ERROR, <system-name>, Emulation
Configuration Error on TunnelId <Tunnel ID>:.
Probable Cause An error has been noted in the FICON configuration. Please refer to the string for the nature of the
configuration issue.
Recommended
Action
If resolution of the configuration issue cannot be completed, please contact your vendor's
customer support for assistance.
Severity ERROR
FICN-1070
Message <timestamp>, [FICN-1070], <sequence-number>,, INFO, <system-name>,
DevTapeIngr:Exceptional Status rcvd on Path=<FICON PATH> state=0x<current
emulation state> status=0x<the exceptional status value>.