Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

168 Fabric OS Message Reference
53-1000600-02
FICN-1071
23
Probable Cause The normal end of tape status (0x0D or 0x05) is received from the device or error status (including
Unit Check 0x02) is received from an active emulation device.
Recommended
Action
The end of tape is a normal event during pipelining and not the unit check. If there are associated
IO error messages with this event, please contact your vendor's customer support for assistance.
Severity INFO
FICN-1071
Message <timestamp>, [FICN-1071], <sequence-number>,, INFO, <system-name>,
HostTapeIngr:Tape Loaded on Path=<FICON PATH>.
Probable Cause Tape IOs are processed from a locally connected LPAR, which indicates that a tape is loaded on a
device.
Recommended
Action
No action is required.
Severity INFO
FICN-1072
Message <timestamp>, [FICN-1072], <sequence-number>,, INFO, <system-name>,
DevTapeEgr:Tape Loaded on Path=<FICON PATH>.
Probable Cause Tape IOs are processed from a locally connected LPAR, which indicates that a tape is loaded on a
device.
Recommended
Action
No action is required.
Severity INFO
FICN-1073
Message <timestamp>, [FICN-1073], <sequence-number>,, INFO, <system-name>,
HostTapeIngr:Unloaded:Path=<FICON PATH>:states=0x<4 prior emulation
states>:cmds=0x<last 4 commands received from the channel for this
device>:status=0x<last 4 status values sent to the channel for this
device>:flags=0x<tape report bit flags>.
Probable Cause A Rewind and Unload IO has been processed from a locally connected LPAR, which indicates that a
tape should be unloaded on a device.
Recommended
Action
No action is required.
Severity INFO