Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

238 Fabric OS Message Reference
53-1000600-02
FW-1334
30
FW-1334
Message <timestamp>, [FW-1334], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of switch connection control policy (SCC) violations has risen above the
high boundary. SCC violations indicate that an unauthorized switch tried to join the fabric. The
SCC_POLICY contains a list of switches by world-wide names (WWNs) that are allowed to be
members of a fabric.
Recommended
Action
Run the errShow command to determine the WWN of the device that sent the request. Responses
to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
Severity WARNING
FW-1335
Message <timestamp>, [FW-1335], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of switch connection control policy (SCC) violations has changed from a
value outside of the acceptable range to a value within the acceptable range. SCC violations
indicate that an unauthorized switch tried to join the fabric. The SCC_POLICY contains a list of
switches by world-wide names (WWNs) that are allowed to be members of a fabric.
Recommended
Action
No action is required.
Severity INFO
FW-1336
Message <timestamp>, [FW-1336], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of device cable connection (DCC) violations has changed. DCC violations
indicate that an unauthorized device tried to join the fabric. The DCC_POLICY allows for the
specification of rules for binding device ports (typically host bus adaptor (HBA) ports) to specific
switch ports. DCC policies ensure that whenever a device performs a fabric login (FLOGI) request,
the world-wide name (WWN) specified in the FLOGI is validated to be connected to the authorized
port. Enforcement for private loop devices not performing FLOGI is done through the name server.
Recommended
Action
Run the errShow command to determine the device WWN, switch WWN, and switch port.
Responses to security-class messages depend on user policies. Consult your security administrator
for response strategies and policies.
Severity INFO