Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

Fabric OS Message Reference 247

53-1000600-02

FW-1359

Message <timestamp>, [FW-1359], <sequence-number>,, INFO, <system-name>, <Label>, is

between high and low boundaries(High=<High value>, Low=<Low value>). Current value

is <Value> <Unit>.

Probable Cause Indicates that the number of authentication failures has changed from a value outside of the

acceptable range to a value within the acceptable range. Authentication failures can occur for

many reasons. The switch on the other side might not support the protocol, have an invalid

certificate, not be signed properly or send unexpected packets. The port where authentication fails

is segmented. This counter keeps track of the number of authentication failures.

Recommended

Action

No action is required.

Severity INFO

FW-1360

Message <timestamp>, [FW-1360], <sequence-number>,, INFO, <system-name>, <Label>, value

has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.

Probable Cause Indicates that the number of switch link authentication protocol (SLAP) faulty packets has changed.

This counter keeps track of the number of unexpected SLAP packets and SLAP packets with faulty

transmission IDs.

Recommended

Action

Responses to security-class messages depend on user policies. Consult your security administrator

for response strategies and policies.

Severity INFO

FW-1361

Message <timestamp>, [FW-1361], <sequence-number>,, INFO, <system-name>, <Label>, is

below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>

<Unit>.

Probable Cause Indicates that the number of switch link authentication protocol (SLAP) faulty packets has fallen

below the low boundary. This counter keeps track of the number of unexpected SLAP packets and

SLAP packets with faulty transmission IDs.

Recommended

Action

No action is required.

Severity INFO