Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

256 Fabric OS Message Reference
53-1000600-02
FW-1427
30
Recommended
Action
Replace the faulty or missing power supply.
Severity WARNING
FW-1427
Message <timestamp>, [FW-1427], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Power supply:
<Number Bad> bad.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
faulty power supplies is greater than or equal to the policy set by the switchStatusPolicySet
command.
Recommended
Action
Replace the faulty power supply.
Severity WARNING
FW-1428
Message <timestamp>, [FW-1428], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Power supply:
<Number Missing> absent.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
missing power supplies is greater than or equal to the policy set by the switchStatusPolicySet
command.
Recommended
Action
Replace the missing power supply.
Severity WARNING
FW-1429
Message <timestamp>, [FW-1429], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor: Power supplies are not redundant.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the power supplies
are not in the correct slots for redundancy.
Recommended
Action
Rearrange the power supplies so that one is in an odd slot and other in an even slot to make them
redundant.
Severity WARNING