Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

368 Fabric OS Message Reference
53-1000600-02
SEC-1022
66
Recommended
Action
Check for unauthorized access to the switch through the SSH connection.
Severity INFO
SEC-1022
Message <timestamp>, [SEC-1022], <sequence-number>,, WARNING, <system-name>, Failed to
<operation> PKI objects.
Probable Cause Indicates that the fabric failed to generate or validate either the public or private key pair or the
certificate signing request (CSR).
Recommended
Action
Run the pkiShow command and verify that all public key infrastructure (PKI) objects exist on the
switch. If the private key does not exist, follow the steps for re-creating PKI objects, outlined in the
Secure Fabric OS Administrator's Guide. If a certificate does not exist or is invalid, install the
certificate by following the field upgrade process.
Severity WARNING
SEC-1024
Message <timestamp>, [SEC-1024], <sequence-number>,, INFO, <system-name>, The <DB name>
security database is too large to fit in flash.
Probable Cause Indicates that the size of the security database is too large for the flash memory. The size of the
security database increases with the number of entries in each policy.
Recommended
Action
Reduce the size of the security database by reducing the number of entries within each policy.
Severity INFO
SEC-1025
Message <timestamp>, [SEC-1025], <sequence-number>,, ERROR, <system-name>, Invalid IP
address
(<IP address>) detected.
Probable Cause Indicates that a corruption occurred during the distribution of the security database. This can occur
only when the primary fabric configurations server (FCS) distributes the security database to the
other switches in the fabric, then local validation finds the error in the security database. This is a
rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity ERROR