Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

378 Fabric OS Message Reference
53-1000600-02
SEC-1064
66
Severity ERROR
SEC-1064
Message <timestamp>, [SEC-1064], <sequence-number>,, ERROR, <system-name>, Failed to sign
message.
Probable Cause Indicates that the public key infrastructure (PKI) objects on the switch are not in a valid state and
the signature operation failed.
Recommended
Action
Run the pkiShow command to verify that all PKI objects are valid. If PKI objects are not valid,
generate the PKI objects and install the certificate by following the field upgrade process.
Severity ERROR
SEC-1065
Message <timestamp>, [SEC-1065], <sequence-number>,, ERROR, <system-name>, Invalid
character in list.
Probable Cause Indicates that the input list has an invalid character.
Recommended
Action
Enter valid input.
Severity ERROR
SEC-1069
Message <timestamp>, [SEC-1069], <sequence-number>,, ERROR, <system-name>, Security
Database is corrupted.
Probable Cause Indicates that the security database is corrupted for unknown reasons.
Recommended
Action
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
and contact your switch service provider.
Severity ERROR
SEC-1071
Message <timestamp>, [SEC-1071], <sequence-number>,, ERROR, <system-name>, No new
security policy data to apply.
Probable Cause Indicates that no changes in the defined security policy database need to be activated at this time.
Recommended
Action
Verify that the security event was planned. First change some policy definitions, then run the
secPolicyActivate command to activate the policies.