Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

Fabric OS Message Reference 387
53-1000600-02
SEC-1101
66
Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can
only occur when the primary fabric configurations server (FCS) is distributing the security database
to the other switches in the fabric and local validation finds that there is an error in the security
database. This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity ERROR
SEC-1101
Message <timestamp>, [SEC-1101], <sequence-number>,, ERROR, <system-name>, Failed to
enable security on all switches. Please retry later.
Probable Cause Indicates that the security enable failed on the fabric because one or more switches in the fabric
are busy.
Recommended
Action
Verify that the security event was planned. If the security event was planned, run the
secFabricShow command to verify that all switches in the fabric are in the ready state. When all
switches are in the ready state, retry the operation.
Severity ERROR
SEC-1102
Message <timestamp>, [SEC-1102], <sequence-number>,, ERROR, <system-name>, Fail to
download
<security data>.
Probable Cause Indicates that the switch failed to download certificate, security database, or policies. This can
happen when switch does not get enough resources to complete the operation, fabric has not
stabilized, or policy database is an invalid format.
Recommended
Action
Wait for fabric to become stable and then retry the operation. If the policy database is in an illegal
format (with configDownload), correct the format and retry the operation.
Severity ERROR
SEC-1104
Message <timestamp>, [SEC-1104], <sequence-number>,, ERROR, <system-name>, Fail to get
primary
<Certificate or public key>.
Probable Cause Indicates that the switch failed to get either the primary certificate or a primary public key.