Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

Fabric OS Message Reference 393
53-1000600-02
SEC-1124
66
SEC-1124
Message <timestamp>, [SEC-1124], <sequence-number>,, INFO, <system-name>, Secure Mode is
off.
Probable Cause Indicates that a secure mode disable is attempted in a non-secure fabric.
Recommended
Action
No action is required.
Severity INFO
SEC-1126
Message <timestamp>, [SEC-1126], <sequence-number>,, INFO, <system-name>, Secure mode has
been disabled.
Probable Cause Indicates that a secure mode disable operation completed successfully.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required.
If the security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-1130
Message <timestamp>, [SEC-1130], <sequence-number>,, INFO, <system-name>, The Primary FCS
has failed over to a new switch.
Probable Cause Indicates that an FCS failover operation was completed successfully.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required.
If the security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-1135
Message <timestamp>, [SEC-1135], <sequence-number>,, INFO, <system-name>, Secure fabric
version stamp has been reset.
Probable Cause Indicates that the version stamp of the secure fabric is reset.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required.
If the security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO