Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

Fabric OS Message Reference 403
53-1000600-02
SEC-1183
66
Recommended
Action
No action is required.
Severity INFO
SEC-1183
Message <timestamp>, [SEC-1183], <sequence-number>,, ERROR, <system-name>, Policy to
binary conversion error: Port
<port number> is out range.
Probable Cause Indicates that a security database conversion has failed because of an invalid value.
Recommended
Action
Retry the command with a valid value.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR
SEC-1184
Message <timestamp>, [SEC-1184], <sequence-number>,, INFO, <system-name>, <server>
configuration change, action <action>, server ID <server>.
Probable Cause Indicates that the specified action is applied to the specified Remote Authentication Dial-in User
Service (RADIUS) / Lightweight Directory Access Protocol (LDAP) server configuration. The possible
actions are ADD, REMOVE, CHANGE, and MOVE
Recommended
Action
No action is required.
Severity INFO
SEC-1185
Message <timestamp>, [SEC-1185], <sequence-number>,, INFO, <system-name>, <action>
switch DB.
Probable Cause Indicates that the switch database was enabled or disabled as the secondary authentication,
accounting, and authorization (AAA) mechanism when the Remote Authentication Dial-in User
Service (RADIUS) / Lightweight Directory Access Protocol (LDAP) is the primary AAA mechanism
Recommended
Action
No action is required.
Severity INFO