Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

Fabric OS Message Reference 413
53-1000600-02
SEC-1309
66
Severity INFO
SEC-1309
Message <timestamp>, [SEC-1309], <sequence-number>,, INFO, <system-name>, Waiting for RCS
transaction to complete:
<Wait time in seconds> secs
Probable Cause Indicates that Secure Fabric OS is still waiting for the reliable commit service (RCS) transaction to
complete.
Recommended
Action
Verify if there are any RCS or RTWR errors. If not, the transaction is still in progress.
Severity INFO
SEC-1310
Message <timestamp>, [SEC-1310], <sequence-number>,, INFO, <system-name>, Unable to
determine data distribution limit of fabric. Please retry later.
Probable Cause Unable to obtain the data distribution limit from all switches in the fabric. This may happen if the
fabric is reconfiguring or a new domain joined the fabric.
Recommended
Action
Retry the command when the fabric is stable.
Severity INFO
SEC-1311
Message <timestamp>, [SEC-1311], <sequence-number>,, ERROR, <system-name>, Security mode
cannot be enabled because one or more of the password policies is not set to
default value.
Probable Cause Indicates that the security enable failed on the fabric because one or more switches in the fabric
have password policies that are not set to the default value.
Recommended
Action
Verify that the security event was planned.
If the security event was planned, run the passwdCfg --setDefault command on each switch in the
fabric to set the password policies to the default value. Then verify with passwdCfg --show that
password policies are set to the default values on all switches and retry the secModeEnable
command.
Severity ERROR
SEC-1312
Message <timestamp>, [SEC-1312], <sequence-number>,, INFO, <system-name>, <MESG
Message>
.