Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

414 Fabric OS Message Reference
53-1000600-02
SEC-1313
66
Probable Cause Indicates that the passwdCfg parameters changed.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required.
If the security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-1313
Message <timestamp>, [SEC-1313], <sequence-number>,, INFO, <system-name>, The passwdcfg
parameters were set to default values.
Probable Cause Indicates that the passwdCfg parameters were set to default values.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required.
If the security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-1314
Message <timestamp>, [SEC-1314], <sequence-number>,, ERROR, <system-name>, Reading <IP
Address Description >
IP address from EM failed.
Probable Cause Indicates that the call to the EM module to retrieve the IP address failed.
Recommended
Action
Please reboot the system to fix this error. If the problem persists contact your switch service
provider.
Severity ERROR
SEC-1315
Message <timestamp>, [SEC-1315], <sequence-number>,, ERROR, <system-name>, <Name of
command > command failed -<List of databases rejecting distribution > db(s)
configured for rejection on this switch
Probable Cause Attempt to distribute database(s) to a switch that was configured not to accept distributions from
the fabric.
Recommended
Action
Verify the accept distribution configuration for the listed databases. Use the fddCfg command to
verify and correct the configuration if necessary.
Severity ERROR