Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

448 Fabric OS Message Reference
53-1000600-02
TRCE-1004
73
Recommended
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR
TRCE-1004
Message <timestamp>, [TRCE-1004], <sequence-number>,, WARNING, <system-name>, Trace dump<
optional slot indicating on which slot the dump occurs >
was not
transferred because trace auto-FTP disabled.
Probable Cause Indicates that trace dump files have been created on the switch or the indicated slot but are not
automatically transferred from the switch because auto-FTP is disabled.
Recommended
Action
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
and contact your switch service provider.
Severity WARNING
TRCE-1005
Message <timestamp>, [TRCE-1005], <sequence-number>,, ERROR, <system-name>, FTP
Connectivity Test failed due to error.
Probable Cause Indicates that the connectivity test to the FTP host fails, because of an FTP error such as a wrong
FTP address, an FTP site down, or the network being down.
Recommended
Action
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
and contact your switch service provider.
Severity ERROR
TRCE-1006
Message <timestamp>, [TRCE-1006], <sequence-number>,, INFO, <system-name>, FTP
Connectivity Test succeeded to FTP site '
<FTP target configured by users.>
'.
Probable Cause Indicates that a connectivity test to the FTP host has succeeded. This feature is enabled by the
supportFtp -t command.
Recommended
Action
No action is required.
Severity INFO