Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

468 Fabric OS Message Reference
53-1000600-02
ZONE-1013
80
Recommended
Action
Check the device connection.
Severity WARNING
ZONE-1013
Message <timestamp>, [ZONE-1013], <sequence-number>,, WARNING, <system-name>, Quick Loop
not supported.
Probable Cause Indicates that the QuickLoop feature is not supported in the current code release. If the QuickLoop
zoning configuration is enabled on the switch, it will not be supported.
Recommended
Action
Edit the zone database to remove the QuickLoop zoning definition in the effective configuration.
Severity WARNING
ZONE-1014
Message <timestamp>, [ZONE-1014], <sequence-number>,, ERROR, <system-name>, Missing
required license -
<license name>.
Probable Cause Indicates that the required zoning license is missing.
Recommended
Action
Install the zoning license using the licenseAdd command. Refer to your switch supplier to obtain a
Zoning license if you do not have one.
Severity ERROR
ZONE-1015
Message <timestamp>, [ZONE-1015], <sequence-number>,, WARNING, <system-name>, Not owner
of the current transaction
<transaction ID>.
Probable Cause Indicates that a zoning change operation is not allowed because the zoning transaction is opened
by another task. Indicates concurrent modification of the zone database by multiple administers.
Recommended
Action
Wait until the previous transaction is completed. Verify that only one administrator is working with
the zone database at a time.
Severity WARNING
ZONE-1017
Message <timestamp>, [ZONE-1017], <sequence-number>,, ERROR, <system-name>, FA
Zone(
<zone name>) contains incorrect number of Initiator and Target devices.