Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

Fabric OS Message Reference 475
53-1000600-02
ZONE-1041
80
Severity INFO
ZONE-1041
Message <timestamp>, [ZONE-1041], <sequence-number>,, WARNING, <system-name>, Unstable
link detected during merge at port (
<Port number>).
Probable Cause Indicates a possible unstable link or faulty cable.
Recommended
Action
Check the SFP and cable at the specified port and verify that they are not faulty. Replace the SFP
and cable as necessary.
Severity WARNING
ZONE-1042
Message <timestamp>, [ZONE-1042], <sequence-number>,, INFO, <system-name>, The effective
configuration has been disabled.
<AD Id>.
Probable Cause Indicates that the effective zone configuration has been disabled.
Recommended
Action
Verify that this zone configuration change was done on purpose. If no effective zone configuration
is needed, no action is necessary.
Severity INFO
ZONE-1043
Message <timestamp>, [ZONE-1043], <sequence-number>,, INFO, <system-name>, The Default
Zone access mode is set to No Access.
Probable Cause Indicates that the Default Zone access mode is set to No Access.
Recommended
Action
Verify that this Default Zone access mode change was done intentionally.
Severity INFO
ZONE-1044
Message <timestamp>, [ZONE-1044], <sequence-number>,, INFO, <system-name>, The Default
Zone access mode is set to All Access.
Probable Cause Indicates that the Default Zone access mode is set to All Access.
Recommended
Action
Verify that this Default Zone access mode change was done intentionally.
Severity INFO