Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

Fabric OS Message Reference 489
53-1000600-02
Chapter
6
AUDIT SEC System Messages
SEC-3001
Message AUDIT, <timestamp>, [SEC-3001], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: <Event Name>, Status: success, Info: Security mode
<State change: Enabled or Disabled> on the fabric.
Probable Cause Indicates that the security mode of the fabric was either enabled or disabled.
Recommended
Action
Verify that the security mode change was planned. If the security mode change was planned, no
action is required. If the security mode change was not planned, take appropriate action as defined
by your enterprise security policy.
Severity INFO
SEC-3002
Message AUDIT, <timestamp>, [SEC-3002], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: <Event Name>, Status: success, Info: <Event Related
Info>.
Probable Cause Indicates that the specified security event has occurred. The Event Name can be one of the
following:
• There has been an fabric configurations server (FCS) failover.
• A security policy has been activated.
• A security policy has been saved.
• A security policy has been aborted.
• A non-FCS password has changed.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required.
If the security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-3003
Message AUDIT, <timestamp>, [SEC-3003], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: <Event Name>, Status: success, Info: Created <Policy
Name> policy, with member(s) <Member List> .