Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

Fabric OS Message Reference 501
53-1000600-02
SEC-3039
6
SEC-3039
Message AUDIT, <timestamp>, [SEC-3039], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: Securty Violation, Status: failed, Info: Unauthorized
host with IP address <IP address of the violating host> tries to establish
connection using <Protocol Connection Type>.
Probable Cause Indicates that a security violation was reported. The IP address of the unauthorized host is
displayed in the message.
Recommended
Action
Check for unauthorized access to the switch through the specified protocol connection. Take
appropriate action as defined by your enterprise security policy.
Severity INFO
SEC-3040
Message AUDIT, <timestamp>, [SEC-3040], WARNING, <Key> [ <Feature> license ] going to
expire in <Expiry_days> day(s).
Probable Cause Indicates that the license period will expire soon.
Recommended
Action
Get a new license for this feature.
Severity WARNING
SEC-3041
Message AUDIT, <timestamp>, [SEC-3041], WARNING, <Key> [ <Feature> license ] is expired.
Probable Cause Indicates that the license period has expired.
Recommended
Action
Get a new license for this feature.
Severity WARNING
SEC-3044
Message AUDIT, <timestamp>, [SEC-3044], INFO, SECURITY, <event-initiator-details>,
<event-location>, FIPS mode has been changed to <Fips Mode>.
Probable Cause Indicates that there was a change in the FIPS mode.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required.
If the security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO