Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

502 Fabric OS Message Reference
53-1000600-02
SEC-3045
6
SEC-3045
Message AUDIT, <timestamp>, [SEC-3045], INFO, SECURITY, <event-initiator-details>,
<event-location>, System has been zeroized.
Probable Cause Indicates that the system has been zeroized.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required.
If the security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-3046
Message AUDIT, <timestamp>, [SEC-3046], INFO, SECURITY, <event-initiator-details>,
<event-location>, FIPS self tests mode has been set to <Self Test Mode>.
Probable Cause Indicates that there was a change in the FIPS Self Test mode.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required.
If the security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-3047
Message AUDIT, <timestamp>, [SEC-3047], INFO, SECURITY, <event-initiator-details>,
<event-location>, RBAC permission denied for CLI : <Cmd Name>.
Probable Cause Indicates that the user does not have permission to execute this command.
Recommended
Action
Verify that the user has the required permission to execute this command.
Severity INFO
SEC-3048
Message AUDIT, <timestamp>, [SEC-3048], INFO, SECURITY, <event-initiator-details>,
<event-location>, FIPS mode has been enabled in the system using force option.
Probable Cause Indicates that the system has been forced to FIPS mode.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required.
If the security event was not planned, take appropriate action as defined by your enterprise security
policy.