Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

Fabric OS Message Reference 505
53-1000600-02
Chapter
7
AUDIT SNMP System Messages
SNMP-1004
Message AUDIT, <timestamp>, [SNMP-1004], ERROR, CONFIGURATION, <event-initiator-details>,
<event-location>, , Incorrect SNMP configuration.
Probable Cause Indicates that the simple network management protocol (SNMP) configuration s incorrect and the
SNMP service will not work correctly.
Recommended
Action
Reset the SNMP configuration to default.
Severity ERROR
SNMP-1005
Message AUDIT, <timestamp>, [SNMP-1005], INFO, CONFIGURATION, <event-initiator-details>,
<event-location>, , SNMP configuration attribute, <Changed attribute>, has
changed from <Old Value> to <New Value>
Probable Cause Indicates that the simple network management protocol (SNMP) configuration has changed as
indicated. The parameter that was modified is displayed as well as the old and new values for
that parameter.
Recommended
Action
Execute the snmpConfig --show command to display the new configuration.
Severity INFO
SNMP-1006
Message AUDIT, <timestamp>, [SNMP-1006], INFO, CONFIGURATION, <event-initiator-details>,
<event-location>, ,
<SNMP Configuration group> configuration was reset to
default.
Probable Cause Indicates that the simple network management protocol (SNMP) configuration group was reset to
the factory default.
Recommended
Action
Execute the snmpConfig --show command to display the new group configuration.
Severity INFO