Brocade Web Tools Administrator's Guide v6.0.0 (53-1000606-01, April 2008)

84 Web Tools Administrator’s Guide

53-1000606-01

Using the Admin Domain window

FIGURE 39 Admin Domain window, summary view

The Admin Domain window displays information about the Admin Domains defined in the fabric. If

you launch the Admin Domain window from AD255 (physical fabric), the window contains

information about the current content of all Admin Domains. If you launch the Admin Domain

window from any other Admin Domain, the module displays the current Admin Domain only.

To manage Admin Domains, you must be logged in with the role of Admin.

ATTENTION

Any changes you make in the Admin Domain window are held in a buffered environment and are not

saved to persistent storage until you explicitly save the changes. If you close the Admin Domain

window without saving your changes, your changes are lost. To save the buffered changes you make

in the Admin Domain window to persistent storage, see “Saving local admin domain changes” on

page 87.

When you are logged into AD0, if a physical fabric administrator modifies the AD configuration from

another session, the changes in the membership might not be visible to you.

When you launch the Admin Domain window and select the parent Admin Domains node in the tree

on the left side of the module, the Admin Domain window displays summary information about all

of the Admin Domains, as shown in Figure 39. You can also select a specific Admin Domain from

the tree to display detailed information about that Admin Domain, as shown in Figure 40. The

detailed view displays summary information as well as information about the online switch, port,

and device members of the selected Admin Domain.