Brocade Web Tools Administrator's Guide v6.0.0 (53-1000606-01, April 2008)

104 Web Tools Administrator’s Guide
53-1000606-01
Managing zones
8
10. Optional: Click Add Other to include a WWN or port that is not currently a part of the fabric.
At this point you can either save your changes or save and enable your changes.
11. Click Zoning Actions> Save Config Only to save the configuration changes.
To enable the configuration, see “Enabling zone configurations” on page 108.
Adding and removing members of a zone
Use the following procedure to add or remove zone members.
1. Open the Zone Administration window as described on page 96.
2. Click the Zone tab.
3. Select the zone you want to modify from the Name drop-down list.
The zone members for the selected zone are listed in the Zone Members list.
4. Highlight an element in the Member Selection List that you want to include in your zone, or
highlight an element in the Zone Members list that you want to delete.
5. Click Add Member to add a zone member, or click Remove Member to remove a zone member.
The zone is modified in the Zone Admin buffer. At this point you can either save your changes
or save and enable your changes.
6. Click Zoning Actions> Save Config Only to save the configuration changes.
To enable the configuration, see “Enabling zone configurations” on page 108.
Renaming zones
Use the following procedure to change the name of a zone.
1. Open the Zone Administration window as described on page 96.
2. Click the Zone tab.
3. Select the zone you want to rename from the Name drop-down list.
4. Click Rename.
5. On Rename a Zone, type a new zone name and click OK.
The zone is renamed in the Zone Admin buffer. At this point you can either save your changes
or save and enable your changes.
6. Click Zoning Actions> Save Config Only to save the configuration changes.
To enable the configuration, see “Enabling zone configurations” on page 108.
Copying zones
Use the following procedure to copy a zone configuration.
1. Open the Zone Administration window as described on page 96.
2. Click the Zone tab.
3. Select the zone you want to delete from the Name drop-down list.