Brocade Web Tools Administrator's Guide v6.0.0 (53-1000606-01, April 2008)

112 Web Tools Administrator’s Guide
53-1000606-01
Managing zone configurations
8
The configuration analysis window displays.
FIGURE 50 Configuration Analysis window
Displaying zones Initiator/Target accessibility
The Initiator/Target Accessibility Matrix shows a list of initiators and a list of targets and indicates
which initiator can access which target.
1. Open the Zone Administration window as described on page 96.
2. Click the Zone Config tab.
3. Select a configuration to be analyzed for device accessibility from the Name drop-down list.
4. Click Device Accessibility.
The Initiator/Target Accessibility Matrix for Config- Device Selection dialog box opens.
5. Select devices you want displayed in the accessibility matrix; click the radio button to select all
devices in the fabric or to select a subset of the devices.
If you select a subset, you must click the devices from the Select Devices list and click Add to
move them to the Evaluate for Accessibility list.
6. Click OK.
The Initiator/Target Accessibility Matrix displays. You can mouse over a target to display the
symbolic name of the device. In addition, you can right-click the device nodes and click View
Device Detail to display detailed information about the selected device.